DIY Basement Workout Room Step 1: The Plan

My web activities have slowed to a crawl as we have begun yet another home improvement project in the Rzepkowski household. This time we are finishing an area of our basement to serve as a workout room for Tricia’s personal training business. My web marketing strategery caused an inflow of clients a few months before she may have been fully prepared, so here we are in the middle of the best part of summer locking ourselves “down in the hole” to prep some much needed home fitness space.

I’m going to post a series of entries outlining the project. I’ll try to write down as many notes-to-self as possible so that I don’t make the same mistakes again the next time I go to do some DIY home improvement. If you learn from any of the choices I make, awesome! If you want to comment on what an idiot I am, go for it! I’m way behind on documenting the steps I’ve already done so your advice will likely fall into the too little too late department. Without further ado, let’s get going…

What Are We Going to Do?
This whole thing started with a simple wife whimper, “Honey, I really need a wall between this one part of the basement and the other part so that all the kids’ junk isn’t in the way of my workout sessions.” I said, “OK, a simple stud wall with a door opening will be no problem. Let’s just put it up. So, I got the car keys and just as I was stepping out the door to go to Lowes I thought, “Gee, maybe I should measure a few things.” I brought my expert consultant to the basement and we literally moved furniture around for an hour trying to figure out how to configure the space.

Visio 2003 Beats the Back of a Napkin
After we tired ourselves out, we decided a floor plan was in order. I popped open Visio Professional 2003 on my computer and draw up a plan of the space and the big items we needed to fit. That way the heavy lifting would be done on the computer, not with our back. The plan you see is by no means an expert architectural blueprint. I misused and abused Visio because I didn’t want to spend the time to learn how to do it 100% right. I wanted to get building the friggin’ basement, not become a Visio Jedi Master. Nonetheless here were a few brief tips on how I made a simple drawing above out of Visio.

1. Create a New Drawing by going to New > Building Plan > Floor Plan. This opens a ton of VERY helpful Visio shapes for creating walls, staircases, furniture, dimensions, etc
2. Set the Scale under Page Setup > Drawing Scale tab. Measure you long outside walls and fiddle with the scale so that the entire drawing will fit on 8.5 x 11. Trust me, you at least want to do the drawing to scale. This is extremely helpful!
3. Use the shapes in the Dimensioning – Architectural palette to show precise measurements on your drawing. These measurements allow you to measure on paper for everything from studs to wiring.

The left side of the drawing is what we are currently building. The rest (including the bathroom) are for a future phase. Learn about the tough decisions we made on insulating and waterproofing cement block walls in my next posting.